Burkett Restaurant Equipment

What To Do Before A Installing Keg Cooler

by · Published · Updated

Last updated on May 13th, 2024 at 01:21 pm

Always read the operations manual of your Keg Cooler before installing the unit. Small errors can lead to not only a ruined unit, but also a voided warranty. Below are a list of tips from True, Turbo Air, and Beverage-Air that should be reviewed before plugging in your Keg Cooler.

Before Installing… Use a voltmeter to make sure your establishments electrical voltage will support the Keg Cooler. If anything less than 100% of the rated voltage for operation is noted, correct prior to hooking up the unit. Compressor warranties are void if compressor burns out due to low voltage.

Before Loading…. We recommend you run your unit empty for two to three days to ensure electrical wiring and installation are correct and no shipping damage has occurred. Most manufacturer warranties will not cover product loss.

Before Tapping… Ensure that all beer faucet in the serving location are in the off position. Completely remove the dust cover/ identification cap from the keg.

Electrical Precautions… If you’ve unplugged your Keg Cooler, wait 5 minutes before restarting the unit. Never plug a Keg Cooler into a breaker with other units or use an extension cord.

Helpful Hints On Maintaining The Correct Pressure:

  • Know which pressurizing agent to use on which product and why.
  • Monitor your regulators to ensure applied pressure remains constant
  • Keep equipment in good repair

Make sure to leave us a Product Review on Keg Coolers for a chance to win a FREE case of Beer Mugs! Just leave a review- no purchase necessary.  Click here to leave a review- I Want to Win a Case of Beer Mugs!

You may also like...